Removing a Rubbermaid mop head is an activity you will need to perform from time to time. A new mop head cleans your surface perfectly. It however gets old and less effective with time. This is the point where you need to remove your mop head for replacement. After removing your mop head, you can then replace it with a new or more effective one.
You also need to remove your mop head when you need to clean it thoroughly. There are spaces in your home that will be too dirty sometimes. They will make your mop too dirty and hard to clean. In this case, you need to remove your Rubbermaid mop head to clean it effectively, by hand.
You can also save yourself all the hassle by washing the mop head in a washing machine. Read on to find the correct steps on how to remove your Rubbermaid mop head.
6 Steps You Should Follow To Remove Rubbermaid Mop Head
Below is a detailed, step-by-step procedure that will guide you through the correct steps of removing a Rubbermaid mop head. Following these steps will make the process easy, fast, and safe.
Step 1: Wring Out Your Mop
Wring out your mop. This step is essential as it makes it easy for you to remove the mop head. With water dripping down the mop handle, it will be messy and difficult to remove the mop head. The water will cause your hands to skid over the handle hence not holding it firmly enough.
Step 2: Position Your Mop Correctly
Stand it in a position that will allow you to access the head easily. Here, you need to stand the mop upside down to bring the mop head closer to you. This position also allows you to access the parts of the mop that you need to unscrew to remove the mop head.
Step 3: Remove The C-Clamp
Separate the yarn carefully to reveal the pole. This will enable you to see the C-clamp close to the tip of the mop head clearly. Consequently, twist the C-clamp to detach it from the pole.
Step 4: Detach The Mop Head
Turn the mop head anticlockwise to unscrew it from the ratchet handle. Once it disconnects, detach it from the pole. This step will leave the mop head hanging from the zip tie.
Step 5: Cut The Zip Tie
In this step, you will need to get a sharp penknife or a pair of scissors. Using your cutting tool, cut the zip tie connecting the mop head to the handle. Cutting it off completely detaches the mop head from the handle for easy removal.
Step 6: Fulfil Your Purpose
At this point, the mop head is separated from the pole. You can therefore do with it what you intended to. You can clean it thoroughly, dispose of it or store it away depending on what your reason for removing it was.
4 Mistakes You Should Avoid While Removing Rubbermaid Mop Head
You need to follow the correct steps when removing a Rubbermaid mop head to avoid ruining it or hurting yourself. Failure to follow the right steps when removing your Rubbermaid mop head can cause damage to your mop. Below are common mistakes that people make when removing a Rubbermaid mop head and guidelines on how to avoid them:
1. Failure To Wring The Yarn
A wet mop will not only mess your floor and clothes but will also make the mop head removal difficult. It will cause your hands to slide against the handle. Without the grip, your hands will not hold the handle strongly enough.
Consequently, removing the mop head will be a harder job than it should be. To avoid the hassle, wring your mop to let out as much water as possible. This mop head is self-wringing but still requires your input to ensure that you get out most of the water.
2. Failure To Position The Handle Correctly
Failure to position the handle correctly will take you too much unnecessary time. It also makes it hard for you to access the head. You should therefore ensure that you stand your op handle on the floor when removing the mop head.
In a standing position, you will access the head and expose the pole. It will also allow you to reach the C-clamp easily to remove the mop head effortlessly.
3. Failure To Unscrew The Mop Head Correctly
Failure to unscrew the mop head can lead to damage. You will have to force the mop head out if you fail to unscrew it properly. Forcing it out will ruin the mop head and the ratchet handle, making it impossible to attach another mop head.
Turn the mop head anticlockwise to unscrew it from the handle before sliding it off the handle. This step will keep your Rubbermaid mop and ratchet handle safe from damage.
4. Failure To Cut The Zip Tie
It will be difficult for you to remove the mop head if you fail to cut the zip tie. This zip tie is tough and will hurt if you attempt to cut it using your bare hands. You should therefore be armed with a tool such as a knife to cut it off. Cutting this zip tie detaches the mop head completely from the handle, allowing you to remove it easily.
3 Smart Tips to Reassemble Rubbermaid Mop Head
Removing a Rubbermaid mop head is an easy and fast task. It may however take longer and involve a lot of hassle if you do not know what you need to make the process a bliss. The tips below will help you to reassemble your Rubbermaid mop head with no trouble.
Tip 1: Get Your Tools Ready
After pulling the barrel through the middle of the mop head, you will need to pull the zip ties and cut the hanging edges. To save time, have your scissors or penknife ready for this step. This way, you will reassemble your Rubbermaid mop head without having to walk around finding the necessary tools.
Tip 2: Ensure That Your Replacement Mop Head Is Dry
The mop head that you intend to replace your old mop head with should be dry. A wet mop head will make your floor and hands messy. It will also be hard for you to maintain the strong grip needed to fix the mop head securely
Tip 3: Get The Correct Replacement Mop Head
There are various mop head sizes in the market. The mop you need is one that perfectly fits your specific ratchet handle. You should therefore determine the size of mop head that you need before buying one.
Related Questions:
How Do you Replace An Old Rubbermaid Mop Head?
Your Rubbermaid mop head will grow old after using it for some time. The old mop will not clean your surfaces as well as a new mop would. At this point, the only way out is replacing the mop head with a newer, more effective one.
To replace the mop head, you will first need to get a new mop head with the same size as the old one. The remove the old head completely from the handle. Slide the opening of the new mop head down the ratchet handle. Ensure that it is perfectly positioned then tie the zip tie tightly.
Why Does My Rubbermaid Mop Head Keep Sliding Off After Replacement?
A Rubbermaid mop is meant to make your cleaning easier and hassle-free. However, this will not be the case if the mop head keeps sliding off the handle. Such a mop head will give you a lot of trouble cleaning. It will also not clean your surfaces as effectively as it should.
A mop head can slide off if it is bigger than the ratchet handle. In this case, get a mop head of the right size. It could also be that you have tightened it enough. Here, you need to tighten the zip tie that attaches the mop head to the ratchet handle.
Why Is Your Replacement Mop Head Not Sitting On The Ratchet Handle?
A Rubbermaid mop head should sit comfortably on its handle. If it doesn’t, it will not clean your surfaces as it should. If this is the case with your mop head, it is time to fix the problem.
First, check whether you have fitted the mop head correctly. If you have not already, align the holes on the ratchet handle with those on the mop head. You should then secure the C-clamp to lock the new head and pole. Turn the mop head clockwise to screw it securely on the handle.
How Often Should A Mop Head Be Changed?
A mop head should be changed after every two months. However, how often you replace your mop head should be determined by how frequently you use your mop. If you use your mop head frequently, it will wear out faster than one that is not put under frequent use.
The size of the floor you mop daily also determines how fast your mop head will wear out. Such mop heads may therefore not serve you for as long as two months. If your mop wears out before two months, consider replacing it immediately to ensure that you clean your floor efficiently.
If your mop head wears out it will not clean your floor as well as a new mop will. It will therefore compromise the cleanliness of your floor and may turn your house into a dirty unappealing space.
Can You Wash A Rubbermaid Twist Mop Head?
You can wash the Rubbermaid twist mop head by hand or using a washing machine. The yarn is made of cotton and can withstand frequent washing, giving you no reason to leave your mop dirty.
You can wash the cotton yarn using hot water and detergent then rinse it with clean cold water to refresh the yarn. You can also bleach your mop without worrying about damaging or weakening the yarn.
How Do You Unscrew Your Rubbermaid Mop Heads?
Rubbermaid mops are easy to unscrew to let lose the mop head for thorough washing or replacement. Remember, however, that unscrewing the mop head inappropriately can damage your mop.
To unscrew a Rubbermaid mop head correctly, position the handle correctly by standing it on the floor upside down. Reveal the collar by parting the yarns apart. Twist the collar anticlockwise to loosen the grip. Remove the mop head for cleaning, replacement, or storage.
How Do You Put Together A Rubbermaid Twist Mop?
After cleaning or disposing of your mop head, you now need to replace it. It will not serve you as efficiently as it should if you do not fix the mop head appropriately. Replacing the mop head and fixing the mop is not as easy as it would seem especially for beginners.
To put your Rubbermaid twist mop together correctly, slide your new/clean mop head up the ratchet handle to the top. Turn the knob clockwise until it produces a click sound. Pull the zip tie tightly until the mop head sits in place without moving along the handle.
How Do You Change The Mop Head On A Rubbermaid Reveal?
To change the mop head on a Rubbermaid Reveal correctly you need to: Unscrew the old mop head that you need to dispose of the ratchet handle. Here, you turn the mop head anticlockwise to unscrew it from the handle. Cut the zip tie attaching the mop to the handle to completely let the mop head free.
Slide the opening of the new mop head through the ratchet handle up to the top, above the rim. Align the holes on the mop head with the holes on the handle to keep it in position.
How Do You Attach A Rubbermaid Mop Head To Handle?
After sliding the mop head down the ratchet handle, you need to secure it firmly. Attaching it securely onto the handle will keep it from moving as you clean your floor. Attaching the mop head to the ratchet handle is quick and easy, but requires a little expertise to attach it correctly.
You must follow the right steps, failure to which you will end up with a loose mop that will not do the job as it should. To attach your Rubbermaid mop head to the handle correctly, turn the mop head clockwise until it produces a click sound. Then pull the zip tie tightly until the mop head sits in place without moving along the handle.
Final Verdict:
Rubbermaid mop has a sturdy handle and tough yarn and cleans your floor excellently. It serves for a long time if you accord it the care it needs. It is essential for every homemaker to learn how to remove a Rubbermaid mop head, change and reassemble it.
You will have to remove the mop head from the handle to replace it or clean it thoroughly. Ensure that you follow the correct steps as discussed above and avoid mistakes to change the mop head safely and easily. Change your mop head as soon as it needs replacement to keep it working effectively.