Mopping floors with Tide powder or any other detergent is a wise idea to clean your floors. Usually, mopping floors feels like spreading around water and makes the floors look worse than before. But a day-to-day life ingredient like tide can be the right solution to make your mopping easier.
If you have never used tide powder for mopping floors, you can still try using tide at least once as an experiment. This idea can reduce your cleaning cost as you don’t need to purchase floor cleaners.
And you’ll need just a sprinkle for mopping your floors, and therefore a small packet of the tide will be enough to help you clean for a whole month. Now, we’ll show you how to make a cleaning recipe with the tide and how and where to use it as follows.
DIY Homemade Tide Cleaning Recipe That Works Better
Homemade tide cleaning recipes work better when they’re made properly by following authentic recipes. In case you’re looking for an original DIY homemade recipe using tide powder, then here we’ll be providing the same for you people as follows:
Recipe 1: Shredded Soap with Borax and Tide
- 5 Gallon of Hot Water with a bucket and a lid,
- 75 oz Tide Detergent Bottle,
- Borax (1 Cup),
- Washing Soda Super (1 Cup),
- Preferred essential oil,
- Shredded Naptha Fels Soap (1 Bar).
- Pour 4 cups of water into a saucepan and mix the shredded Naptha Fels Soap,
- Stirring and keeping it heated on medium or high volume until it melts,
- Fill half of the 5-gallon bucket with hot water,
- Pour down the mixture of water and shred soap into it,
- Pour the cup of borax and super washing soda into the bucket and stir,
- Pour down the essential oil and keep stirring,
- Fill the other half of the bucket with more hot water,
- Take the lid, put it on the bucket, and wait for a day,
- Then, add 1 or 2 cups of the tide into the bucket and stir the next day.
And your recipe will be ready for cleaning any type of floor and making it clean right away.
Recipe 2: Water and Tide Powder
- Spin Mop Bucket;
- Tide Powder;
- Hot water.
- Take out the spin mop bucket and fill it with hot water to the half,
- Add 1 or 2 tablespoons of the tide into it and stir for a few seconds to dissolve,
- Then add regular water and fill it by 3/4th of the bucket,
- Let the bucket cool for a few minutes, and then start mopping your floors.
This is a more straightforward recipe for the people who don’t want to do many things for making floor cleaning recipes with the tide. If you’re also one of them, you should try this method right now.
4 Simple Steps To Mop Floors With Tide: Easier Than You Think
As we have already shown you the recipes to make cleaning solutions with tide powder, now it’s time to teach the steps to mop your floors using those recipes. These are pretty easy and simple steps that anyone can learn and use in a few minutes. So, let’s dive into the detailed steps as follows:
Step 1: Picking The Right Mop
To mop your floors perfectly with the tide, you should first start with your best mop. Soak your mop into the water first. Do not use the wet mop to clean the floors because it will only make them dirty. Remove all the excess water by pressing the mop and then use it on the floors.
Step 2: Making And Using Tide Recipe
Then, you should go for deeper floor cleaning by making your mop wet with the tide recipe. Apply our homemade tide cleaning recipe to create a solution. Take the mop out of the bucket and press it hard with your leg to take out the excess water.
Then, start cleaning the floors however you want to. You can choose your preferred one from the above and use it to mop your floors.
Step 3: Cleaning The Dust And Debris
After that, you need to collect the dust first and then the larger debris. Clearing out the dust and debris will ease the cleaning job for you. You can use either warm water with a tide solution directly or rinse them with clothes soaked.
Step 4: Things To Remember
But while mopping the floors, make sure that the handles of your mop are adjusted right under your chin. Then keep sweeping with the tide going backward, covering all the areas of your floors. Try not to use the same solution more than twice. Otherwise, the floors will only get dirty.
So, these are the steps you can follow to mop your floors with the tide and keep your floors clean and shiny. And when you’re done cleaning the entire floor, you’ll get to see the results of your work right away.
Therefore, if you think that mopping floors with the tide isn’t an easy option, we will assure you that it’s easier than you think. To agree with our point, follow the mentioned steps to mop your floors with the tide:
6 Recommended Places Where Using Tide As Cleaning Solution
You can’t randomly use tide detergent as a cleaning solution anywhere you want. There are a few places or floors where you should avoid using tide powder. These are the types of foundations where you can use tide as a mopping solution to clean them:
1. Laminate Floor:
If your place has laminate floors and you’re confused about using tide as a mopping solution, let us assure you that the tide solution works fine on the laminate floors. However, laminate floors don’t have a good relationship with water, so you need to properly take the excess water out of your mop.
Otherwise, the water may seep underneath your laminate planks, making them less durable. You can also try spot cleaning or damp mopping with the tide solution to not damage your laminate floors.
2. Vinyl Floor:
A tide solution with apple cider vinegar is the perfect choice to clean vinyl floors. So, if you have vinyl floors in your home, you should not worry about using a tide solution because it won’t harm your floors. Instead, it will make your floors completely clean and shiny within a few minutes after cleaning.
3. Hardwood Floor:
Hardwood floors require proper care and attention to keep and maintain their shape and look. It needs a pH-neutral solution; otherwise, it may get damaged. Therefore, whether it’s commercial or natural, the outcome won’t be pleasant at all using regular cleaning products.
But as our tide recipes are a pH-neutral solution that won’t damage your floors; instead, it will protect and clean the wood perfectly. But you need to take a different approach when the floors are made of waxed hardwood. You have to use a dry and damp mop to clean this type of floor.
4. Linoleum Floor:
Linoleum floors are pretty resilient, and therefore, this surface demands a mild cleaner. Though it isn’t as resilient as the vinyl floor, it still requires proper attention while choosing the cleaner. You can see from our tide recipe that they’re pretty mild but still can work wonders on most of the floors.
So, try using our recipe for your linoleum floors and get shiny floors in a few hours. While cleaning the floors, try going section by section to help you clean the floors properly. But you can clean a linoleum floor with a dampened mop as it won’t affect the Linoleum floors.
5. Ceramic Tile Floor:
In the case of ceramic tiles, tide and white vinegar with water can create an ideal solution for mopping. This solution is not a toxic one, and therefore your pets will stay safe after cleaning. This type of floor is the perfect place to try our tide recipe and clean them with it.
You’ll be astonished by the outcome because nothing can give you that much clean and shiny floors without using tide as a mopping solution. So, you can try tide as a mopping solution on your ceramic tiles without any doubt.
6. Stone Tile floor:
Lastly, using tide as a mopping solution on your stone tiles can be an outstanding idea once you try it. The recipe we suggested above is a perfect choice for stone tiles. Because stone tile requires non-chelating and pH-neutral cleaner, and it won’t react with the available floor cleaners.
Therefore, cleaning stone tiles seems quite challenging for many of us, but not now. You can make it easier by using tide as a mopping solution for your stone tile. So, without trying other cleaners or recipes, you should route for the tide recipes to clean stone-tiled places.
4 Things You Should Keep In Mind While Cleaning With Tide Powder
You should keep in mind a few things while cleaning your floors with tide powder. You should not skip them in any situation because otherwise, you won’t get the result you’re hoping for. So, to ensure the best development using tide powder solution, you must follow them.
Here they are as follows:
1. Always Use Two Buckets:
Two buckets can get you better results and save your time as well. This is a hygienic idea because you’ll use one bucket for cleaning and one for rinsing in this process. This will keep the clean and dirty water separately in two buckets and ensure proper cleaning.
You can dip your dirty mop into one and still wring out the water from the other bucket without contaminating it when you have buckets to use. This is a huge advantage, and you’ll understand it while mopping. It will reduce the time of changing water and save your precious time.
2. Wringing Out:
You can use both string mop and sponge mop for tide solution to clean your floors. But you should choose according to the type of floors you have at your home. Because string mop absorbs a tremendous amount of water solution, it’ll require several times of wringing.
But a sponge mop will need less time because of holding less water. This is why it’s an ideal choice for laminate flooring and hardwoods. So, when you’re done choosing a mop, let your mop absorb the recipe at first by dipping. Then, wring it out as much as possible to keep it moist to get the best outcome.
You always need to remember that you need a damp mop to clean your floors, not a wet one. So, dipping your mop into the recipe won’t cut the task for you.
3. Proper Wiping:
Proper wiping is a must for getting clean and shiny floors at home. Therefore, wiping it in the appropriate direction is necessary to get the best results. You can wipe the floors like you would paint a floor.
To do that, you need to start from one corner of your room and wipe backward going toward the exit to avoid going into the area you just mopped. Therefore, you have to pay attention to floor patterns and types to push your mop correctly.
If you have hardwood floors in your home, you should start wiping into the wood grain direction. In case of a textured surface, wipe it smoothly. But when you see a stubborn spot, then try mopping that with a cloth.
4. Blow It Out:
If you want to make sure that you get a germ-free place, you should mop your floors with a tide solution. It will keep the floor shiny and disinfect it at the same time. But before disinfecting it with water, you need to wait for at least ten minutes.
You should never let your mop sit in the bucket for drying because it’ll create bacteria on your mop. It’ll ruin the moisture and make your floors infected after that. Therefore, blowing it out is a good option for germ-free floors.
So, after dipping it into the tide recipe, squeeze it hard so that every last drop of water is blown out. It will make your routine cleaner and more straightforward. Therefore, you won’t need to worry about when you pull your mop out after that.
If you can follow and take care of these things, then mopping should be an exciting task for you. You will also keep your floors shiny, clean, and germ-free.
7 Easiest Tide Floor Cleaning Hacks For Newbies
You may have gathered all your required knowledge about mopping floors with tide by this time. However, for you to get maximum efficiency while mopping, I will elaborate precisely on 7 hacks that will make your mopping easier than ever before. Not just this, you will indeed be benefitted implying all these hacks on your floor. So, why not?
1. Changing The Mop
You must be using the same old mop that you have been using for ages. Have you ever thought of changing it though? If not, it is high time. In most cases, people avoid this very important move and continue working on other segments. But at the end of the day, it’s your mop that works on the floor.
No matter how good-grade materials (mopping liquid) you use, if your mop isn’t clean itself, nothing will work out. I repeat, nothing at all! So, change the mop as soon as possible and get going with the mopping floors.
2. LED Mops
There will be situations when you won’t find any better ways to clean all the “hard-to-reach” places on your floor. For example, beneath your couch or under the dining table. Specks of dust and debris construct on these spots and make things hard while cleaning. A LED mop can get you a massive rid of this endless dilemma.
No, no. These mops aren’t really expensive as you are thinking. You will easily afford one of these mops spending a bit more than the usual budget for a mop. But in terms of efficiency, LED mops are top-notch.
3. Hydrogen Peroxide Cleaning
Though we are talking about cleaning floors with tide here. But sometimes, situations may turn worse than ever before. For example, there will be times when grouts form on the surface of the floor and never really gets away with mediocre treatments. In these cases, treating the floor with hydrogen peroxide may work.
Hydrogen Peroxide is a weak acid that consists of a destructive nature. It removes all the stains when treated with slightly hot water. So, if the grouts of your floor turn hard to remove, only a petty amount of peroxide bleach can make your ride memorable.
4. Applying Laundry Detergent
I don’t think I have to write a thesis on this topic. Because, throughout the whole piece, I have been talking about it. Tide is also a kind of laundry detergent that could have been used on removing dust, stains, debris, and grout from the floor. However, there are many more substantial detergents that you can try for better results. Trust me, your end result will be far beyond your expectation.
5. Making Of DIY Floor Cleaner
Even after all these, if the stains don’t go away off your floor, there is no other alternative that you can implement other than making your own DIY floor cleaner. For this, you can apply many recipes.
The most popular and efficient of all recipes is mixing vinyl with warm water. Just take ½ teaspoon of vinyl and apply it to one bucket of hot water. Now stir it for some time and then apply it all over the floor. You are good to go now.
6. Using Black Tea
You may apply all the mentioned stuff to harsh and rough surfaces like laminate floors, VCT tile floors, and ceramic floors. But what about hardwoods? Thing is, you would never be able to get yourself away with applying peroxide bleaching or laundry detergent on hardwoods. Over a certain amount of moisture, the hardwood must start to degrade. What to do in these cases?
Well, a perfect and freshly brewed cup of black tea is what you need. Just mix it with your cleaning solution and mop the floor with it. I know it sounds funny. But it really works. In case you don’t believe it, apply yourself and see the magic!
7. Start With Cleaning Pet Hairs
Before you jump off to mopping, don’t forget to clean the randomly scattered pet hairs accumulated on your floor. The thing is, if you apply the solution with pet hairs in it, the entire process might get affected and utter boredom will surely consume you while mopping the floor.
To get rid of it, you must have to clean all the hairs from the floor surface and then begin mopping.
Nonetheless, all these might sound meaningless to you. But if you can apply carefully, these will be very efficient and indeed bring a better result for your floor. Get the lead out then, what say?
Mopping Floor with Tide Pod and Downy?
Using a Tide Pod and Downy fabric softener for mopping floors is not recommended. These products are intended for laundry use, and using them on floors can have adverse effects. Tide Pods contain detergents that can leave a soapy residue on the floor, making it slippery and potentially damaging the surface.
Downy fabric softener can leave a waxy residue, making the floor slippery and difficult to clean. It’s best to use products specifically designed for floor cleaning to ensure effective and safe results.
Mixing laundry products with floor cleaning can also lead to unsafe and unpredictable reactions, so it’s essential to stick to appropriate cleaning solutions for your floors.
Mopping Floors With Tide Pods and Fabric Softener?
Mopping floors with Tide Pods and fabric softener is not recommended. Tide Pods are laundry detergent pods, and fabric softener is designed for use in the laundry, not for floor cleaning.
Using these products on your floors can leave behind residue, making them slippery and potentially causing damage to the floor’s surface. It’s best to use dedicated floor cleaning products and follow the manufacturer’s instructions for the specific flooring type you have.
Mixing household cleaning products can also be unsafe and may lead to harmful chemical reactions, so it’s important to stick to appropriate and safe cleaning solutions for your floors.
Mopping Hardwood Floors With Tide?
Using Tide or any laundry detergent to mop hardwood floors is not recommended. Laundry detergents can leave a soapy residue on the floor, which can lead to a slippery surface and potentially damage the wood’s finish over time.
Instead, it’s advisable to use a hardwood floor cleaner or a mixture of water and a hardwood-specific cleaning solution. These products are designed to clean wood floors effectively without causing any harm.
Be sure to follow the manufacturer’s instructions for the specific cleaning product you choose and use a damp (not soaking wet) mop to protect the hardwood from excess moisture, which can also be damaging.
Is Tide Powder And Bleach An Effective Solution For Mopping?
Tide powder and bleach is an effective cleaning solutions for mopping. These days, most companies highly recommend bleach and tide powder solutions as scouring solutions. Their combination is non-acidic and therefore can clean the floors without damaging them.
This is why people use tide powder and bleach as their mopping solution nowadays. You can try this mixture anywhere, whether on the walls or bathroom floors or in house rooms.
Can You Use Tide On Laminate Floors?
Tide, as a laundry detergent, is one hundred percent safe to use on all types of laminate, hardwood, VCT, and ceramic floors. Implies, can be your utmost companion while dust and debris form on your floor. Just grab a sachet of Tide and apply it. Voila, you are good to go!
However, for hardwood floors, I don’t think applying Tide will be wise. Though, it won’t affect the floor that much. But in a long run, the floor may get degraded by consuming moisture. Better treat eat with brewed black tea.
Is Tide Powder PH Neutral?
If we look forward to the standard PH range of Tide powder, then it will be precisely 10-11.5. Implies, Tide powder is moderately basic/alkaline in nature. So, yes, the answer is all the way negative. Tide powder is not a PH-neutral detergent.
On a similar note, no detergent is PH neutral basically. The detergency power of a surfactant shows up when its PH of it gradually moves up after 8. Here, 7 is the neutral PH range.
Can You Mix Tide And Bleach?
In laundries, they often mix tide with bleach to extract the maximum whitness of the given fabric or apparel. The same mechanism works out for all our floors. For example; VCT tile, laminate, and hardwood. So yes, it’s nothing wrong to mix bleach and tide to get accuracy in the cleaning of your floors.
But no matter what you do, it’s always essential to maintain the ratio of the bleach and the tide. If you mismatch the ratio, things will get worse and the solution may degrade your floor. So, before putting a step, carefully make moves.
Should You Mop With Tide And Why?
You should try mopping with tide powder. Because it has some cleaning enzymes which work perfectly and pull away stubborn dirt from the floors. You will just need a bucket full of water and one cup of laundry detergent to get the best results.
When you use our tide powder recipe to clean your floors, you’ll see the results right in front of your eyes. Therefore, to keep a clean and shiny floor.
How Often Should You Mop Your Floor With Tide Powder?
The answer to this question should depend on your choice because once a week mopping floors with tide powder can get you clean floors. But in case you are not satisfied with it, you can undoubtedly try mopping your floors with tide powder daily.
Therefore, you can clean your floors daily or wash them once a week with tide detergent. But make sure that you do not take more time than this.
Can You Use Powdered Tide On Hardwood Floors?
No matter the form of the tide, it’s discouraged all the way to apply tide on hardwood floors. The hardwood floors can not hold moisture for a long time. Rather, it starts to degrade after a certain amount of time. This is why I would never appreciate you putting powdered tide on hardwood floors.
As an alternative of it, you can use brewed black tea on the cleaning bath. It consists of a very substantial power of cleaning things out. So, make sure you’re doing it. But for laminate floors and tiles, powdered and liquid tide would work the best. That’s it.
Can You Get Laundry Detergent Out Of Car Carpet With Tide Powder?
The features of car carpet cleaner and laundry detergent are exactly the opposite. Implies, you can not get laundry detergent out of car carpet and tide powder. Even if you manage to do it in any intelligent ways, things won’t sustain in the long run. That’s for sure.
Well, for your convenience, you can use the mixture of laundry detergent and tide powder on your floor to get a bright and lustrous floor for good. But if you let a car carpet cleaner interrupt in the middle, your floor cleaning would never get its own way. So, I would suggest you not do it.
Can You Use Liquid Tide Instead Of Powder Tide To Clean Floors?
As long as you’re cleaning the floor with the tide, the only thing that will matter is if you’re using tide or not. The form in which the tide is, won’t ever matter. So, no matter if you’re using tide’s liquid form or powder form, nothing will bother you that much.
The only thing you must have to take care of is the serviceability of the detergent. If it goes bad, you must have to check it before using it and make sure. Using the expired cleaning powder might damage the luster of your floor. No matter if it’s made of laminate or hardwood, the thing will indeed get degraded.
Why Are Your Floors Still Dirty After Mopping With The Tide?
There can be two reasons behind this issue. One is using wet mops while cleaning the floors without rinsing them. The other one is dipping the dirty mop into the detergent. This recommends using two separate buckets for mopping floors with tide powder.
It makes sure that you keep rinsing your mop and keep it separated from the dirty water as well. Ensures that your detergent solution stays clean. So, your floors won’t remain dirty if you can avoid these two mistakes while mopping.
Is It Okay To Mix Laundry Detergent With Tide Powder?
The thing is, laundry detergents are natural liquid detergents while the tide is an alkali-based one. Mixing these two might never going to put a nose on anything but at the same time, it’s not really recommended by experts. Things might turn back and create imbalance while doing so.
It will be my humble request to you to not do it. But however, if you have already fixed your mind on it, I won’t mind. But maintain the necessary precautions before doing anything out of undainty.
Can You Use Liquid Tide To Mop Floors?
You indeed can use the liquid tide to mop your floors. A big-size liquid tide detergent will cover all your cleaning requirements. You can use it to sweep any type of floor, including vinyl and stone tile. Only 1 or 2 tablespoons of the liquid detergent tide will be enough to clean the foundations of a house easily.
When you make this recipe and try it on your floors, you’ll be able to see the results right away. So, you should not waste any more of your time mopping floors without tide powder.
How Much Powdered Tide To Clean Floors?
The amount of powdered tide you should use to clean the floor is pretty much fixed. Which is, one tablespoon for a bucket of hot water. Just measure it and spin the wheel to perfectly mix the powder with the water. Based on your bucket’s shape, the amount of detergent may fluctuate.
The rise of bubbly water will indicate the end of the mixing process. After you have mixed the detergent in the bath competently, squeeze the mop to rinse the extra water. Excess addition of detergent will make your floor slippery. So, don’t!
Can You Mix Tide Powder And Bleach Together To Mop The Floor?
You can mix tide powder and bleach and make a solution with them to mop the floor. But you should make sure that you properly mix them. Otherwise, things can go the other way because bleach is a risky gas and can easily get combined with most things on earth. As you can see here, mixing tide and bleach powder can be a good idea to mop your floors.
Can I Use a Tide Pod to Mop My Floor?
No, you should not use a Tide Pod to mop your floor. Tide Pods are designed for laundry use, not for cleaning floors. Using them on your floor could potentially damage the floor’s surface, and the detergent in the pod may leave a soapy residue that is difficult to rinse off.
It’s best to stick to products specifically intended for floor cleaning, such as floor cleaners or mopping solutions. These products are formulated to effectively clean floors and are less likely to cause any harm to your flooring.
Always follow the manufacturer’s instructions for the best results and to maintain the longevity of your floors.
Can you Use Liquid Tide to Mop Floors?
Yes, you can use liquid Tide for mopping floors, but it’s important to dilute it properly. To do this, mix a small amount of liquid Tide with water in a bucket according to the product’s recommended dilution ratio.
Using too much detergent can lead to residue buildup and make your floors sticky. Typically, a couple of tablespoons of liquid Tide per gallon of water should suffice for most floor types.
Make sure to rinse the floor with clean water after mopping to remove any detergent residue. Always follow the manufacturer’s guidelines for both the detergent and your flooring type to ensure a clean and safe result.
Can you Use Tide Pods to Mop Floors?
Using Tide Pods to mop floors is not recommended. Tide Pods are designed for laundry use and contain concentrated detergent that can be harmful if not diluted properly. Mopping with Tide Pods could leave a soapy residue on your floors, making them sticky and potentially creating a slipping hazard.
Instead, it’s better to use a floor cleaner or a purpose-made floor detergent specifically designed for mopping. These products are formulated to clean floors effectively without leaving residue, ensuring a safer and cleaner environment for you and your family.
Always follow the manufacturer’s recommendations for cleaning products to achieve the best results and maintain the longevity of your flooring.
Mopping the floor using the regular floor cleaners isn’t an ideal option these days. Most of the floors don’t suit them. Therefore, your floors can get damaged and remain unclean at the same time. No one would like that to happen with their floors.
This is why mopping floors with tide detergent is a safe and hygienic way to mop and clean the floors. It is a less time-consuming, affordable, and money-saver option for anyone. So, without giving this idea any more thoughts, you should better go for it and start mopping your floors with tide powder right away.