Bona mop is a convenient and lightweight mopping partner for cleaning the floor quickly and effectively. It is handy and safe for all types of flooring, including hardwood, and gives a sparkly surface. Indeed it is an excellent mop, except for it not spraying correctly. The problem is common for everyone. Do you know why a bona mop is not spraying properly?
The most common reason the Bona mop is not spraying can be a leaky water container. When water leaks out, the nozzle fails to spray correctly. Another reason might be broken parts. If any of the parts break, it can’t spray properly. A damaged trigger may cause this problem.
Keep reading further to know other reasons and solutions for a Bona spray mop not spraying appropriately.
A Short Table With Reasons And Solutions Why Bona Mop Not Spraying
Here is a short table to summarize and clarify the major reasons and solutions for problems with Bona floor cleaner.
|Leaky Water Container
|Clean The Water Container
|Repair Or Replace
|Wait Between Each Spray
|Assemble Parts Correctly
|Clean The Nozzle
To fix and learn these problems, keep reading and know more.
5 Common Reasons For Bona Mop Not Spraying Its Style
There can be various errors in why the Bona mop fails to spray in its style. If you know the exact reason, fixing them becomes more straightforward. Mostly, these issues are not complicated and can be solved just by assembling the parts correctly.
1. Leaky Water Container:
When the container containing water or the cleaning solution is leaky, the blend will leak out of the tank, and the nozzle won’t get any answer to spray out. If the container does not sit properly in the mop, it will leak water from the ends, causing a faulty spray. Also, a clogged spray pore can cause a leak.
Clean the container once and fasten it properly to the mop to avoid leaks.
2. Broken Parts:
Since the mop is made from plastic, some parts may break over time. When this happens, the spray doesn’t work appropriately, causes leaks, and becomes shaky. The spray trigger breaks, too, due to regular use. These issues are unavoidable, and if you are using it for too long, the mop will become faulty.
Solution: If the parts break down, this is the time to get a new Bona mop.
3. Stuck The Trigger:
A prevalent thing, which is not an issue, is the trigger spraying slowly and steadily. If you want to spray fast, this is not likely to happen, as the trigger takes a few seconds to get back to its position after a single spray. Have patience! It may take a few seconds for the stimulus to spray again.
Solution: It is better to just wait for seconds before spraying again if the bona mop trigger not working.
4. Not Assembled Properly:
If the spraying is not consistent, this is maybe because the container is not fixed correctly to the mop. When this happens, the Bona cartridge stucks, water leaks out, and the spraying nozzle is misplaced. As a result, the spray doesn’t function properly.
Solution: Make sure to assemble and fix the container before using the Bona mop.
5. Clogged Nozzle:
If you use detergent or some heavy cleaning solution, the nozzle and pores get clogged. The trigger fails to pump the cleaner out through the nozzle when this happens. The clogs restrict the cleaner from coming out. So make sure you dilute the cleaner well in water to prevent clogging.
To open a clogged nozzle, clean the nozzle and pores thoroughly.
How To Reassemble And Use Bona Mop Correctly? [5 Steps]
Most of the time, the faulty spray happens for not assembling the parts correctly. So if you learn to create the Bona mop and use it correctly, you won’t likely face any spraying issues.
Here are the super-easy steps of reassembling and using a Bona mop:
Step 1: Attach the Lower Mop Pole
Place the mop head on the ground facing the flat end towards the bottom. Next, take the lower mop pole with the tall silver Bona mop handle facing upward. The other end has an attachment that you need to insert into the gap just at the middle of the mop head. Press the mop pole into this gap, and you hear a ‘Click.’
Step 2: Attach the Upper Mop Pole
The other end of the lower pole has a rubber cap to which you need to attach the upper mop pole. Simply insert the upper mop pole into the rubber cap and push until you hear a ‘click.’
Step 3: Glue The Mop Pad
The Bona mop pad doesn’t require inserting into the mop head. You can lay the mop pad on the ground with the soft microfiber surface toward the bottom. The other side of the cushion has a mild adhesive.
Place the mop head just in the middle of the pad, and it will get adhered to the mop pad. Note that the cushions are easy to reuse and wash.
Step 4: Fasten The Cartridge
The cartridge contains the water and cleaning solution. Pour a Bona cleaning solution and water into the cartridge first. Now remove the cap from the cartridge end and push it into the holder until you hear a ‘click.’ There is a silver release button at the bottom of the holder.
You can press it and remove the cartridge easily. Remove and reposition if the Bona cartridge won’t click in.
Step 5: Use The Mop
You can spray the solution on the floor and leave a shiny and sparkly floor. Don’t spray too much, and make sure to clean the residue. Start from one end of the room and keep moving forward for the floor to dry properly.
After every use, clean the mop pad and empty the cartridge for maintenance.
Things Should Keep In Mind To Avoid Bona Mop Not Spraying Issue
To maintain and increase the longevity of the Bona mop, here are some tips that I have learned from hands-on experiences. You should follow them to make your bona mop efficient and last longer.
1. Store Bona Mop Securely:
Improper storage of the Bona mop often damages the mop parts. The right way is to detach the parts of the Bona mop after every use since you don’t use it daily. Wipe the parts with a clean cloth. Then, store them securely to keep the parts intact and safe from damage. Keep them in a clutter-free place.
2. Choose The Right Solution:
Powder detergent and some abrasive cleaners can block nozzles. So it is better to use liquid cleaners only. The best is to use a Bona floor cleaner as a Bona mop is designed for these cleaners. Other cleaners may clog the spray and make it faulty. So choosing the right cleaning solution is the key to avoiding spraying issues.
3. Clean Regularly:
If you don’t keep the mop clean, spraying problems may occur. Any blocked space can cause such issues. So clean the microfiber mop pad after every use. It would keep the pad soft, and you can reuse it several times. Besides, clean the nozzle and cartridge for spraying effectively.
4. Avoid Rough Use:
A Bona mop is not designed for regular use. It is for deep cleaning the floor. So don’t overuse the mop. Using the Bona mop once a week is enough to keep the floor clean. If you use it roughly and frequently, you may end up damaging the parts that won’t spray properly.
5. Assemble Accurately:
Most of the time, poor or improper assembling causes leak and spraying issues. This is why you should assemble the parts of the Bona mop as instructed. Otherwise, the loose connection and poor assembling reduce the life of the existing parts.
Follow these tips to get the best result.
Bona Spray Mop vs Swiffer Wet Jet?
Bona Spray Mop and Swiffer WetJet are both popular cleaning tools, but they have some key differences. The Bona Spray Mop is designed primarily for hardwood and other hard-surface floors. It features a refillable cartridge for your preferred cleaning solution and a washable microfiber pad.
It’s known for its eco-friendly, reusable design and the ability to use your choice of cleaning solution. Swiffer WetJet, on the other hand, is versatile and designed for multiple floor types. It uses disposable pads and a pre-filled cleaning solution, offering convenience but generating more waste.
Swiffer WetJet may be more accessible and user-friendly for quick cleaning tasks, while the Bona Spray Mop provides a more sustainable and customizable option, catering to those with specific floor cleaning needs. Your choice depends on your preferences and priorities.
How To Refill a Bona Spray Mop Cartridge?
To refill a Bona spray mop cartridge, follow these steps. First, remove the cleaning pad from the mop head. Next, locate the cartridge on the mop handle, usually near the base. Look for a small tab or latch and press or slide it to unlock the cartridge.
Once unlocked, carefully pull out the empty cartridge. Prepare your cleaning solution by mixing the recommended Bona cleaning concentrate with water, following the instructions on the product label.
Pour the mixture into the empty cartridge, ensuring not to overfill. Reinsert the filled cartridge into the mop handle and lock it in place. Finally, reattach the cleaning pad, and your bona hardwood floor spray mop is ready for use.
How To Take Apart a Bona Spray Mop?
To disassemble a Bona spray mop, start by removing the cleaning pad from the mop head. Next, locate the release button or lever typically situated near the base of the mop handle. Depress or slide this button to unlock the mop head.
Once unlocked, you can slide the mop head off the handle. If you need to access the spray mechanism or other internal parts, consult the manufacturer’s instructions, as this may require further disassembly.
Be careful when taking apart the mop to avoid damage, and always ensure your safety by following any provided guidelines or precautions. Reassembling the mop is typically the reverse of these steps.
How To Fix Leaking Bona Mop?
A Bona mop leaking is a common problem, and all homeowners face it at one point or the other. The problem typically arises when there is a leak in the container that contains the spraying water or cleaning solution. First, remove the bottle from the Bona mop and check it for leaks.
If the bottle does not have any leaks or holes, then clean it properly, along with the spray nozzle. Place the bottle back into the spray mop and ensure that it is set properly. Check the mop to see whether there are any leaks or not.
How Long Does Bona Mop Last?
The Bona mop will last for quite a few years if you maintain it properly. However, leaks and other small problems are common, and you can fix them easily instead of purchasing a new one. The microfiber cleaning cloth connected to the mop must be cleaned on a regular basis and replaced after almost every 300 washes.
You can clean the microfiber pad in the washing machine, or you can hand wash them with warm water. But make sure that you do not use any sort of bleach, fabric softener, and so on.
Is A Bona Mop Good?
Keeping the floor of your home clean is important to ensure healthy living and also helps to maintain the flooring. Daily dusting helps to get rid of dirt, dust, debris, and so on easily from the floor. The Bona mop is one of the top wet mops available in the market right now.
Using a microfiber cloth to clean the floor or relying on a wet mop is essential to remove the grime or dirt that the dry dusting cannot remove. And the Bona mop makes cleaning the floor of your home easier. Not only that, but it ensures efficient and fast cleaning.
How Does The Bona Mop Work?
The Bona mop is one of the most efficient floor cleaners that you can rely on in today’s date. This mop works on all surfaces without any trouble and ensures a top-quality cleaning without any trouble. First, you will have to assemble the components of the cleaning mop and put them properly in place.
Fill the bottle with water or any cleaning solution of your choice, and clean the floors properly. Make sure to wash the microfiber cleaning cloth after use and store the system properly. This will help you to avoid the mess of cleaning with a mop and water bucket.
Can I Use Vinegar In The Bona Mop?
The Bona mop is used to ensure the best cleaning of the floor of your home. For the best performance, it comes with a pre-filled bottle to get rid of dust, dirt, debris, and so on. The pH-neutral formula ensures cleaning without damaging the floor.
Once the solution runs out, you can purchase a new bottle or fill the bottle with a homemade solution. Mix a small amount of dish soap with water and refill Bona mop container. Not only that, but you can also use diluted vinegar to clean the flooring.
What Is The Main Reason If The Bona Mop Not Spraying?
A Bona mop fails to spray when the assembling is incorrect, and the water leaks out of the cartridge. When the mop fails to maintain water flowing, it may cause great damage.
Another reason is the poor assembling of the mop. It reduces the functionality of the spray, and the Bona mop fails to spray cleaner. So ensuring the exact reason is crucial. After that, you can fix the problem immediately.
How Do You Fix A Bona Spray Mop Without Spraying?
To fix a Bona mop, you need to check whether the parts are assembled correctly or not. Also, check for any broker parts in the mop and replace them if found any.
If they exist, reassemble them correctly and replace them with new nuts and bolts. Due to the correct fixation of all mop parts, there will be no spraying problems. Besides, keep the mop pad, and other parts cleaned to avoid spraying issues.
How Do You Unlock A Bona Spray Bottle?
There is a release button just at the bottom of the bottle holder. Press the release button to unlock the bottle and pull the spray bottle out of the holder. That is how you open and detach a spray bottle.
Another approach you can use to open a bona mop is loosening the nuts and bolts. If it is not working correctly, try to apply the first one as it is the most convenient one.
How Do You Disassemble A Bona Spray Mop?
To disassemble Bona mop, you need to click open the cartridge, pull out the upper mop pole, and click on the lower mop pole button. To detach the pad, strip open the pad.
You can also disassemble a bona spray mop by pulling the arm. Moreover, you can use WD-40 for dismantling. Just spray over it and see the result.
Why is My Bona Mop Not Spraying?
When a Bona mop is not spraying, it can be a frustrating experience, but several potential factors could be at play. The first step is to ensure that there is an adequate amount of cleaning solution in the refill cartridge. If the cartridge is empty, the mop won’t spray any liquid.
Another common issue is blockages or clogs in the nozzle or spray mechanism, which can impede the flow of the cleaning solution. Regularly inspecting and cleaning these components is essential. If the spray pump is not working correctly or the batteries in a battery-operated mop are weak, that could also be a cause.
Additionally, checking for leaks and loose connections is important. If troubleshooting these aspects doesn’t resolve the problem, consulting the user manual or contacting Bona’s customer support for more comprehensive assistance is recommended.
Are all Bona Spray Mop Refill Bags The same size?
Bona spray mop refill bags are not necessarily the same size. Bona offers a range of cleaning solutions and refill cartridges designed for various purposes, such as hardwood floors, stone, tile, or laminate.
These different solutions may come in varying sizes and formulations to cater to the specific needs of different floor types. Therefore, it’s essential to carefully select the Bona refill that matches the type of flooring in your home and the product you own.
Always refer to the packaging and product information to ensure you choose the correct refill for your bona spray mop for hardwood floors, as using the appropriate refill is key to achieving the best cleaning results.
Do Swiffer Refills Work With Bona Spray Mops?
Swiffer refills are not designed to work with Bona spray mops. Both Swiffer and Bona are prominent brands that offer different types of cleaning solutions and tools. While Swiffer products come with their specific refills and compatible cleaning solutions,bona floor premium spray mop are intended to be used with Bona cleaning solutions and corresponding refills.
It’s essential to use the recommended products for each brand to ensure optimal performance and avoid any potential damage to the mop or the floor.
Using the appropriate refills for the designated mop helps maintain the effectiveness of the cleaning process and ensures the best results for your cleaning needs.
How To Remove Cleaner Bottler From Bona Spray Mop?
Removing the cleaner bottle from a Bona spray mop involves a few simple steps. To start, ensure safety by turning off the mop and verifying that the bottle is either empty or nearly so. Next, locate the bottle near the top of the mop, often situated under the handle, and find the locking mechanism or clip that holds it in place.
Depress or unlock this mechanism, which may require gentle twisting or following specific instructions for your model. As the bottle is released, carefully lift it from the mop. You can then proceed to refill it with your chosen Bona cleaner or a compatible solution before reattaching it by reversing the steps.
For model-specific guidelines and safety measures, it’s advisable to consult the user manu
al provided with your particular Bona spray mop.
You will eventually enjoy the best cleaning benefits as you learn to assemble and use a Bona mop. As you know why your bona mop is not spraying correctly, troubleshoot the spraying problems by reassembling the Bona mop parts and keeping the device clean. Follow my tips and solutions and make the best use of your Bona mop.